#MUSTANG ECU TUNING FOR MAC#
#MUSTANG ECU TUNING SERIAL#
#MUSTANG ECU TUNING DRIVERS#
#MUSTANG ECU TUNING MANUAL#

The LM-2 is a hand held data logging device about the size of a paperback book. We carry the Innovate line of wideband O2 sensor systems.

#MUSTANG ECU TUNING FOR MAC#

Yes, the tuning software works for Mac and Linux, not just Windows.

#MUSTANG ECU TUNING SERIAL#

The 9 pin serial port on the other MSPNPs did not clear the stock mounting bracket on this car, so we have opted to use a 2.5 mm barrel connector for the serial cable for this model.

#MUSTANG ECU TUNING MANUAL#

The transmission in Fox body Mustangs operates independently from the ECU, so you can use this one with a manual or automatic transmission.

What if I have an automatic transmission?

The MSPNP Gen 2 has a maximum of four fuel channels, so it is configured for bank to bank fueling in this application.

This unit can function as a boost controller if you add our boost control solenoid package.Р”Вoes the MSPNP Gen 2 support sequential injection on Fox body Mustangs?.

If you are tuning it yourself, a wideband O2 sensor system is a must have for adjusting the fuel.

However, there are several other things you may wish to add to use this unit to its full potential.

The only other potential must-have is that if your laptop doesnРІР‚в„ўt have a 9 pin serial port, you will need our USB to serial adapter to connect to this unit.

Is this all that I need to get started tuning my Mustang? It also unlocks the ability to use customized dashboards, such as our MSPNP2 Dash, which is designed specifically to help make tuning your new build intuitive and easy! The paid version of TunerStudio simply adds tuning and analysis software, such as VE Analyzer Live to tune the fuel tables based on wideband O2 feedback (requiring a wideband O2 sensor and controller, sold separately). The free version included on the USB Stick can access all the features and tables of the MegaSquirtPNP. Note: Although there is a paid upgrade to TunerStudio, it is not needed to tune this ECU.

6РІР‚Р† Vacuum Hose for MAP Signal and РІР‚ВTРІР‚в„ў fitting.

Tuning Software and Documentation USB Stick with TunerStudio Lite.

MSPNP RS232 serial tuning cable, 6РІР‚Р† (USB adapter sold separately, if needed).

Ford Mustang ECU РІР‚вЂњ MegaSquirt Gen2 Plug and Play Engine Management System.

CANBus connector allows interconnection of other MegaSquirt-compatible devices for additional functions (EGT Input, Automatic Transmission Controller, Additional Sensors)РІР‚В¦.the possibilities are limitless!.

Input for flex fuel sensor РІР‚вЂњ switch between E85 and gasoline on the fly!.

Change fuel and spark maps on the fly for different fuels, nitrous activation, etc.

Headphone output for knock sensor РІР‚вЂњ listen for knock while you tune!.

Knock sensor input with adjustable sensitivity.

Closed loop boost control (Requires boost solenoid kit).

Internal 4-bar MAP sensor reads up to 44PSI of boost.

Built-in 2-step rev limiter / launch control with flat shift.

12Р“вЂ”12 Air Fuel Ratio Target Tables for use with wide band O2 sensor for precise tuning and table trim.

Allows removal of stock MAF sensor, if so equipped.

#MUSTANG ECU TUNING DRIVERS#

Onboard peak and hold drivers support both high or low impedance injectors РІР‚вЂњ No external ballast resistor is needed!.

Multiple Acceleration enrichment strategies.

16Р“вЂ”16 Fuel Tables allow high resolution tuning.Yes, this can replace your A9L ECU and give you full control of your engine management needs without the MAF airflow restriction!.Mounts in the stock location РІР‚вЂњ case is specifically designed to use factory mounting points.Uses internal MAP sensor РІР‚вЂњ can be used on both cars with factory MAF or speed density.Supports most aftermarket wideband sensors.Real time tuning and data logging with a laptopР’В connection.5.0 HO base maps is pre-loaded to help your engine start on the first turn of the key.Fully Plug and Play Installation РІР‚вЂњ No wiring required for basic functionality.Ford Mustang 8693 MegaSquirt Gen2 PnP Plug and Play Standalone Engine Management System is compatible with the following:Р”РЋ986-1993 Ford Mustang 5.0 & 1986-1988 Ford Thunderbird 5.0 with manual or factory automatic transmissions! Easy to Use and Install! (Can be reconfigured for some other EEC-IV (EEC4) equipped cars with internal jumper changes by special order РІР‚вЂњ contact DIYAutoTune for details)Р”Р‡ord Mustang ECU РІР‚вЂњ MegaSquirt Gen2 Plug and Play Model #EEC4A8 Features:

Mustang ecu tuning